CYP CH-1605TXV Instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Nadajnik CYP CH-1605TXV. CYP CH-1605TXV 20 stron. 4k uhd+ hdmi over hdbaset 2.0 transmitter (pse) with hdr/arc
Drukuj stronę
6.6 Serial Commands (Via USB Port)
COMMAND
Description and Parameters
help
Show the full command list.
?
Show the full command list.
get fw ver
Show the unit's current firmware version.
get model name
Show the unit's model name.
get model type
Show the unit's product type.
get power
Show the unit's current power state.
set system reboot
Reboot the unit.
get audio out A route
Show the currently selected optical audio source type from the
connected Receiver (ARC or optical).
set transceiver compress rate N1
Set the compression quality used by the unit.
Available values for N1:
1
2
get transceiver compress rate
Show the unit's current compression quality setting.
Note: Commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive.
7
[HQ (high quality)]
[STD (standard quality)]