CYP PU-8H8CTXIR Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Nadajnik CYP PU-8H8CTXIR. CYP PU-8H8CTXIR 20 stron. Cyp 8-way hdmi hdbaset transmitter with 8x8 ir matrix (inc. poe)

Drukuj stronę

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Transmitter's Front Panel

LCM:

This monitor displays your setting information of each IR's input and

output selection.

IR:

This IR window accepts the remote control signal of this device

and all the source and display equipment's IR signal.

Power button and LED:

Press this button to turn on the device or press it again to set it to

standby mode. The LED will illuminate in green when the power is

on and in red when in standby mode.

All:

Press this button to select all IR output with one IR input signal. The

sequence should be pressing ALL → Number Key → ENTER.

LOCK button and LED:

Press this button to lock all the buttons on the panel and the green

LED will illuminate. To unlock press it again.

ENTER:

Press this button every time after the setting or the selection is

made.

Selection 1~8:

When selecting IR input with IR output press Number Key first (for

output selection) and then press the Number Key again (for input

selection).

2 3 4 5 6