Dolby Laboratories DP591 Skrócona instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Konwerter mediów Dolby Laboratories DP591. Dolby Laboratories DP591 19 stron. Object authoring tool
Również dla Dolby Laboratories DP591: Skrócona instrukcja obsługi (9 strony)
Drukuj stronę
3 Installation
This section provides procedures for installing the DP590 desktop client.
•
Installing the hardware
•
Configuring the network settings
•
Downloading and installing the DP590 client
Installing the DP590 requires:
3.1 Installing the hardware
Install the DP590 using the components included with the unit, plus any other equipment
you require for your intended use. After the unit is installed, proceed to configuration and
full operation.
Procedure
1. Rack mount the DP590 in a 1-U rackspace. The DP590 measures 44 × 483 × 394 mm (1.75
× 19 × 15.5 inches), so the rack must be at least 16 inches (400 mm) deep.
Caution: To ensure proper ventilation, do not block the front-panel ventilation area
on the top surface at the front of the machine.
2. Connect the provided power cable to the AC connector.
3. Connect your audio and video inputs and outputs.
4. Connect an Ethernet cable from your network to the Command port.
5. To turn on the device, press the power button.
3.2 Configuring the network settings
About this task
The DP590 uses a COMMAND port network connection. The port connects to your
management network through a web browser. By default, the COMMAND port is set to . To
configure the port, use the front-panel navigation keys shown in this figure.
Figure 3: Front-panel navigation keys
3.2.1 Configuring the command port
The DP590 uses a COMMAND port network connection.
Dolby DP590 object authoring tool quick-start guide
24 June 2016
3.1 Installing the hardware
8