CYP CH-507TX Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik CYP CH-507TX. CYP CH-507TX 16 stron. Hdmi over cat5e/6/7 transmitter and receiver
Również dla CYP CH-507TX: Instrukcja obsługi (11 strony), Instrukcja obsługi (16 strony)
Drukuj stronę
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
Front
HDMI In
1
2
HDMI In
1
Connect to HDMI source equipment such as a DVD or Blu-ray
player.
2
LAN
Connect to an internet or network connection.
RS-232 In
3
Connect to a PC or laptop with D-Sub 9 pin male cable for the
transmission of RS-232 commands.
4
Power LED
This blue LED will illuminate when the device is connected to a
power supply.
5
DC 24V
Plug the 24 V DC power supply into the unit and connect the
adaptor to an AC outlet.
6
IR 1 Blaster
Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be
controlled.
IR 2 Extender
7
Connect to the supplied IR receiver cables for IR signal reception.
Ensure that remote being used is within the direct line-of-sight of
the IR extender.
3
Transmitter
RS-232 In
HDMI to CAT5e/6 with LAN/IR/RS232
3
Rear
IR1 Blaster
Power
DC 24V
IR2 Extender
4
5
6
7
8
9