CYP PU-1109KIT Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik CYP PU-1109KIT. CYP PU-1109KIT 16 stron. 5-play hdbaset™ extender kit (inc. poe & 3x lan, up to 100m)
Również dla CYP PU-1109KIT: Instrukcja obsługi (12 strony)

Drukuj stronę

6.2 Receiver

Front
Power
IR 1
IR 2
Extender Blaster
1
2
3
1
Power LED: The red LED will illuminate when the 24 V DC Adaptor is
connected to the AC outlet.
2
IR 1 Extender: This slot is to connect with the IR receiver cables
included in the package for IR signal reception. The related IR
transmitter port is IR1 Blaster.
3
IR 2 Blaster: Connect the IR blaster cables included in the package for
IR signal transmission. The related IR receiver port is IR2 Extender.
4
RS-232 Out: Connect to a device that can be controlled (via D-Sub
9-pin female cable) by RS-232 commands.
5
Link LED: This yellow LED will illuminate when the both CAT5e/6
input and output signal is connected.
6
CAT5e/6 IN: Connect the transmitter and receiver via a single CAT5e/6
type cable for all data transmission.
7
HDMI Out: Connect to a HDMI equipped TV or monitor to display the
HDMI input source signal.
8
LAN 1/2/3: The LAN connections can be used to connect and share up
to 6 ethernet connections (3 at the receiver end, 3 at the transmitter
end), including computers, routers and media servers.
Link
RS232 Out
CAT5e/6 In
4
5
6
Rear
HDMI Out
LAN 1
7
LAN 2
LAN 3
8
9