CYP PU-507RX-2HCD Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik CYP PU-507RX-2HCD. CYP PU-507RX-2HCD 12 stron. Hdbaset lite receiver with dual hdmi output, audio de-embedding, poc, rs-232 & 2-way ir (up to 60m)
Drukuj stronę6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
DC 24V
POWER
1
2
1
Power LED: This LED will illuminate when the device is connected to
a power supply.
DC 24V: Plug the 24 V DC power supply into the unit and connect
2
the adaptor to an AC outlet. Only one side of power is needed to
activate both Transmitter and Receiver when both obtain the PoC
function.
4
CAT5e/6/7 IN: Connect from the Transmitter unit with a Single
CAT5e/6 cable for receiving all data signals.
5
IR IN: Connect to the supplied IR Receiver cables for IR signal
reception. Ensure that remote being used is within the direct line-
of-sight of the IR Extender.
6
IR OUT: Connect to the supplied IR Blaster cable for IR signal
transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
7
USB: This port is reserved for fi rmware update only.
3
CAT5e/6/7 IN
IR 1
IN
3
4
IR 2
OUT
USB
5
6