CYP PUV-1730PLRX-AVLC Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik CYP PUV-1730PLRX-AVLC. CYP PUV-1730PLRX-AVLC 17 stron. Hdbaset hdr receiver (70m) (4k, hdcp2.2m poh, oar, 18gbps)
Drukuj stronę
used to send commands directly to the Receiver.
Note: RS-232 bypass requires both the Transmitter and Receiver to be set
to "Bypass" mode.
6.2 Rear Panel
1
HQ & STD LEDs: These LEDs illuminate to indicate which AVLC mode
will be used when AVLC is required. The lower green LED indicates that
AVLC will use HQ (High Quality) mode. The upper yellow LED indicates
that AVLC will use STD (Standard) mode.
2
HDMI OUT: Connect to an HDMI TV, monitor or amplifier for digital
video and audio output.
3
CAT5e/6/7 IN: Connect to a compatible, 48V PoH supplying, HDBaseT
Transmitter with a single Cat.5e/6/7 cable for transmission of all data
signals as well as to power the unit.
1
2
3
9