CYP PUV-1830RX-AVLC Podręcznik - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik dla Odbiornik CYP PUV-1830RX-AVLC. CYP PUV-1830RX-AVLC 17 stron. Hdbaset hdr receiver 4k, hdcp2.2, poh, lan, oar, 18gbps

Drukuj stronę

used to send commands directly to the Receiver.

Note: RS-232 bypass requires both the Transmitter and Receiver to be set

to "Bypass" mode.

6.2 Rear Panel

LAN: Connect to an Ethernet supporting device or to your local

network, as appropriate, to extend the network to both ends of the

HDBaseT connection.

HQ & STD LEDs: These LEDs illuminate to indicate which AVLC mode

will be used when AVLC is required. The lower green LED indicates that

AVLC will use HQ (High Quality) mode. The upper yellow LED indicates

that AVLC will use STD (Standard) mode.

HDMI OUT: Connect to an HDMI TV, monitor or amplifier for digital

video and audio output.

CAT5e/6/7 IN: Connect to a compatible, 48V PoH supplying, HDBaseT

Transmitter with a single Cat.5e/6/7 cable for transmission of all data

signals as well as to power the unit.