Ashford TRADITIONAL SPINNING WHEEL Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Narzędzia i akcesoria tkackie Ashford TRADITIONAL SPINNING WHEEL. Ashford TRADITIONAL SPINNING WHEEL 18 stron.
Drukuj stronę
SINGLE DRIVE
Thread 12 hooks into
Step 12 - 21 For Single Drive only. For Double Drive go to Step 22.
the flyer.
Thread 12 hooks into
the flyer.
Screw 12 hooks into
the flyer
Assemble the flyer unit.
Assemble the flyer unit.
Check the shape of the
Check the shape of the
nylon bearing on each
nylon bearing on each
maid upright, wax the
maid upright, wax the
dowel ends, then insert
into the correct hole.
dowel ends, then insert
Insert the drive belt
into the correct hole.
adjusting knob into the
Insert the drive belt
maiden bar, turn until the
adjusting knob into the
end just protrudes.
maiden bar, turn until the
end just protrudes.
Check the angle of the nylon
bearings. Then secure the maid
uprights with screws and washers.
Do not overtighten. The maid
uprights may be twisted to remove
the bobbin. Position the drawing
pin directly beneath the drive
band adjusting knob.
9