Ashford TDSW04072014V9 Instrukcja montażu - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wirujące koła Ashford TDSW04072014V9. Ashford TDSW04072014V9 13 stron. Traditional spinning wheel single drive
Drukuj stronę
Check the angle of the
nylon bearings. Then
secure the maid uprights
with screws and wash-
ers. Do not overtighten.
The maid uprights may
be twisted to remove the
bobbin.
Position the drawing
pin directly beneath the
drive band adjusting
knob.
2
x
2
x
Place the bobbin, small
end first, onto the flyer.
Then locate the flyer into
the bearings. Thread the
screw eye into the side
of the maiden bar, and
screw hook into the op-
posite side.
5