Ashford TDSW110618V11 Instrukcja montażu - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wirujące koła Ashford TDSW110618V11. Ashford TDSW110618V11 13 stron. Traditional, single drive
Drukuj stronę
Set the treadle assembly
on the edge of a table.
Insert the conrod joint
into the large slot in the
treadle rail.
Note the crank bearing
faces the back of the
spinning wheel.
Hold the conrod
joint with one hand
on either side of the
treadle rail.
stretch and slide it
into the small slot
and turn it back
a ¼ turn until it
clicks into place.
8
With both hands,
turn the conrod
joint a ¼ turn,