CYP CPRO-8E Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kable i złącza CYP CPRO-8E. CYP CPRO-8E 13 stron. 1x8 hdmi splitter
Również dla CYP CPRO-8E: Instrukcja obsługi (11 strony)
Drukuj stronę
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
EDID
OUTPUT
STD
TV
2
1
1
EDID STD/TV: The default factory setting is TV, when in this mode,
the unit will detect the first HDMI output device's EDID settings and
record them in the unit's memory. If there are any audio or video
issues then switch the unit to STD (Standard) mode and power
cycle it, the unit will be configured as standard stereo (PCM) Audio
and initiate a search for a common compatible video resolution.
2
HDMI OUTPUTS 2/3/4/5/6: Connect each of the output ports to an
HDMI display for simultaneous HDMI distribution.
6.2 Rear Panel
SERVICE
OUTPUT
7
1
1
SERVICE: Manufacturer use only.
2
HDMI OUTPUTS 7/8/1: Connect each of the output ports to an HDMI
display for simultaneous HDMI distribution.
3
SYNC LED: The LED will illuminate when the HDMI source signal is
connected to the input port.
4
HDMI INPUT: Connect the input port to the HDMI or DVI output of
your source equipment such as DVD player or set-top box.
5
POWER LED: The power LED will illuminate when the unit is powered.
6
DC 5V: Connect the 5V DC power supply into the splitter and Plug
the adaptor to AC wall outlet.
3
OUTPUT
OUTPUT
3
OUTPUT
SYNC
8
2
3
OUTPUT
4
5
2
INPUT
4
CPRO-8E
OUTPUT
4KX2K SPLITTER
6
OUTPUT
POWER
DC 5V
1
2
5 6