CYP CSDI-42 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kable i złącza CYP CSDI-42. CYP CSDI-42 12 stron. 4 by 2 switcher/splitter
Również dla CYP CSDI-42: Instrukcja obsługi (16 strony)
Drukuj stronę
1. Introduction
The 3G-SDI 4 by 2 Switcher Splitter allows SD-SDI, HD-SDI and 3G-SDI signals to
be shown on SDI display while ensuring high bit rates of 2.970 Gbit/s to give
you fast signal transmission without signal loss. For professionals this means
that it is now easier to switch four 3G-SDI signals and split it up to two SDI
signal outputs.
2. Applications
Video broadcasting display
Professional video program display
Film studios program monitoring
Video program switching display
3. Package Contents
3G-SDI 4 by 2 Switcher Splitter
Remote Control (CR-23)
5V/2.6A DC power adaptor
Operation Manual
4. System Requirements
Input connects with SDI sources and output connects with SDI displays, all
input/output with SDI cables.
5. Features
Four 3G-SDI input sources can selected as the source and split to two
3G-SDI displays simultaneously
Operation at 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s
and 270Mb/s
Supports SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE 292M,
SMPTE 259M-C
Provides the Equalized and re-clocked transmission
Control by RS-232, IR Remote and on panel buttons
Supports signal input and output distance of up to 300M for SD signals,
200M for HD signals and 100M for 3G signals.
Note: Cable tested with Belden 1694A. Operating distances may vary if
used with another type of cable.
1