CYP HDBT CHDBT-1H7CL Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kable i złącza CYP HDBT CHDBT-1H7CL. CYP HDBT CHDBT-1H7CL 16 stron. 1×8 hdmi over hdmi and cat5e/6/7 splitter
Drukuj stronę
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
SYNC
1
1
POWER LED: The LED will illuminate when connected to an active
power supply.
2
SYNC LED: This LED will illuminate when the HDMI input is connected
to a HDMI source and receiving a signal.
3
HDMI OUT LINK LED: This LED will illuminate when HDMI output is
connected to TV or display monitor and receiving a signal.
4
CAT5e/6/7 OUT LINK 1~7 LEDs: The link LEDs will illuminate when the
receivers are connected to the CAT 5e/6/7 outputs are connected
to TVs or displays and displaying a signal.
6.2 Rear Panel
HDMI IN
HDMI OUT
1
2
1
HDMI IN: Connect to HDMI equipped source equipment such as a
DVD/Blu-ray player or games console.
2
HDMI OUT: Connect to a HDMI display for local monitoring of the
HDMI signal or cascade to another Splitter.
3
CAT5e/6/7 OUT 1~7: Connect to CAT5e/6/7 to HDMI Receivers (with
or without PoE) with a single CAT5e/6/7 cable each to extend the
HDMI signal up to 60 m.
4
IR IN: Connect the supplied IR Receiver cable for IR signal
reception. Ensure that remote being used is within the direct line-
of-sight of the IR Extender.
3
HDMI
LINK
LINK 1
LINK 2
2
3
CAT5e / 6 / 7 OUT
1
2
3
3
CAT5e / 6 / 7 OUT
LINK 3
LINK 4
LINK 5
LINK 6
LINK 7
4
4
5
6
7
IR IN
IR OUT
DC 24V
EDID
SERVICE
STD
TV
4
5
6
7
8