Cypress CYALKIT-E03 Instrukcja obsługi zestawu - Strona 17
Przeglądaj online lub pobierz pdf Instrukcja obsługi zestawu dla Mikrokontrolery Cypress CYALKIT-E03. Cypress CYALKIT-E03 19 stron. Solar-powered ble sensor beacon 5 pack
Drukuj stronę4.2 How to Install the Board in the Enclosure
Use the following is steps to install the Solar BLE Sensor board in the enclosure.
1.
Set the transparent sheet to top cover as shown below.
2.
Adjust the position of the circle mark on the bottom cover and SW1 on the Solar BLE Sensor. Put in the Solar BLE
Sensor in the bottom cover.
3.
Adjust the position of the circle mark on the top cover and SW1 on the Solar BLE Sensor. Install the top cover on the
bottom cover.
CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Doc. No. 002-12543 Rev. *A
Transparent
sheet
Adjust the
position
Top Cover
Bottom Cover
Transparent sheet is fixed by snap fit
Enclosure
17