Cypress EZ-USB NX2LP-Flex CY3686 Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Mikrokontrolery Cypress EZ-USB NX2LP-Flex CY3686. Cypress EZ-USB NX2LP-Flex CY3686 2 stron.

Drukuj stronę
CY3686 EZ-USB
1
Unpack the kit contents. Using the CD/DVD
provided in the kit, install the kit contents and
Keil uVision IDE.
3
Ensure jumpers J3-J14 and J16 are enabled,
write protect switch SW1 is in the OFF position,
and the NX2LP IC pad U1 is unpopulated.
®
NX2LP-Flex™ DEVELOPMENT KIT
QUICK START GUIDE
2
Set the switches on the FX2LP base board.
SW2 is set to the EEPROM position and
SW1 is set to the large EEPROM position.
4
Stack up the FX2LP base board, the
prototype board (optional), and the NX2LP
flex board. Connect it to the host PC. The
device enumerates as a removable drive
in 'My Computer'. Try transferring data to
and from the drive.