Cypress S6J3200 Series Manuallines - Strona 6

Przeglądaj online lub pobierz pdf Manuallines dla Mikrokontrolery Cypress S6J3200 Series. Cypress S6J3200 Series 9 stron.

Drukuj stronę
S6J3200
5V
3.6
Distance Between IC and Connector
Theoretically, the distance between the driver and receiver on a transmission line should have limited impact on the
signaling. In reality, the longer and more complex the routing between these points, the larger the imbalance
introduced into the signals and the more difficult it becomes to maintain a matched delay for all five balanced pairs.
When possible, place the IC as close as possible to the FPD-Link connector.
routing between the IC and connector.
www.cypress.com
Figure 6. Layout of Power and Ground
1.2V
VCC3_LVDS_TX
1pin
Figure 7. Distance Between IC and Connector
Connector
Other parts
Other
parts
S6J3200
Distant
Document No. 002-11139 Rev. *A
FPD-Link PCB Guidelines for the Traveo Family S6J3200 Series MCUs
S6J3200
Bypass capacitors
Connector
S6J3200
Close
GND
VSS_LVDS_TX
1pin
Figure 7
shows the recommended
6