Cypress CAPSENSE EXPRESS CY3218-CAPEXP1 Skrócona instrukcja obsługi - Strona 16
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Płyta główna Cypress CAPSENSE EXPRESS CY3218-CAPEXP1. Cypress CAPSENSE EXPRESS CY3218-CAPEXP1 20 stron. Capsense express evaluation kit
Również dla Cypress CAPSENSE EXPRESS CY3218-CAPEXP1: Skrócona instrukcja obsługi (2 strony)
Drukuj stronę
Button1 (C0)
Button2 (C1)
Button3 (C2)
Output1 (G3)
Output2 (G4)
6.16. Click OK to close the User Pin Assignment window.
6.17. Click Apply to board. Wait for the Configure through USB2IIC Bridge status window
appears and click OK.
6.18. Click OK to close the CapSense Express 10 GPIO/CS Button Set: ThreeButtons window.
Monitor the Board
6.19. In the Design pane, select Monitor. The Monitor Status indicator shows Connected
.
6.20. Right-click ThreeButtons and select Show Tuner.
The Monitor Status indicator changes to Running
GPIO / CS BUTTON SET: ThreeButtons window opens.
6.21. Touch the leftmost CapSense button. The red bar in the Pin Specific Tuning pane
responds to your touch.
Page 16
Driver
Pin
GP0[2]
GP1[4]
GP1[3]
GP1[0]
GP1[1]
Driver
Output3 (G5)
Output4 (G6)
Output5 (G7)
Output6 (G8)
Input1 (G9)
, and the CapSense Express 10
Pin
GP0[1]
GP0[0]
GP0[3]
GP1[2]
GP0[4]