Cypress CY3203-CapSense Skrócona instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Płyta główna Cypress CY3203-CapSense. Cypress CY3203-CapSense 20 stron. Psoc express
Drukuj stronęCreate a CapSense Project
Assign Drivers to Pins
3.15. In the User Pin Assignment window, click Unassign All Pins. All drivers move to the Unassigned Driv-
ers list.
3.16. To assign drivers to pins, drag and drop drivers from the Unassigned Drivers list onto a pin. Assign the
CapSenseProperties_ExternalCap driver to port P0[3].
3.17. Assign the rest of the drivers according to the following table.
CapSenseProperties_ExternalCap
LCD_SHARED_0LCDPin11
Slider_CSA_Slider00
Slider_CSA_Slider01
Slider_CSA_Slider02
Slider_CSA_Slider03
Slider_CSA_Slider04
Slider_CSA_Slider05
Slider_CSA_Slider06
Slider_CSA_Slider07
3.18. Click Next. PSoC Express builds your project (this may take a few minutes).
12
P0[3]
P2[0]
Note: The LCD has more than one
driver that must be assigned. PSoC
P0[0]
Express Automatically assigns all
P0[1]
the drivers for the LCD when the first
driver is assigned to pin P2[0].
P0[2]
P2[7]
P0[4]
P0[5]
P0[6]
P0[7]
CY3203A-CapSense Quick Start Guide, Spec. # 001-17826 Rev. *A