Cypress EZ-PD CY4533 Podręcznik - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik dla Płyta główna Cypress EZ-PD CY4533. Cypress EZ-PD CY4533 20 stron. Barrel connector replacement (bcr) evaluation kit
Drukuj stronę
1. Introduction
The CY4533 EZ-PD™ Barrel Connector Replacement (BCR) Evaluation Kit (EVK) is based on the BCR product in Cypress'
USB Type-C and Power Delivery controllers. This EVK is intended to be an evaluation vehicle for applications that would
want to consume power over a USB Type-C Connector.
A device, such as a speaker, shaver, power tools, modem etc. that use a barrel connector for power will benefit from using a
universal power interface such as USB Type-C. To make the transition easier, the CY4533 EVK provides a USB Type-C
receptacle to consume power from a charger and then supply it over a terminal block. A barrel connector can be attached to
this block using wires to convert a barrel input to USB Type-C.
1.1 Kit Contents
The CY4533 EZ-PD BCR EVK consists of the following:
CY4533 EZ-PD BCR EVK Board
Quick Start Guide
1.1.1 Hardware Not Included with the Kit
The CY4533 EZ-PD BCR EVK does not come with all the hardware required to perform the demonstrations mentioned in Kit
Operation. The following items are not included:
A USB Type-C Power Adapter that can supply power over the Type-C port
A two-wire cable with a barrel plug to supply power to an existing device
A device that accepts power from a barrel input
USB-C cable required (if not already provided with the USB-C Power Adapter) for connecting the USB Type-C power
adapter to the Type-C receptacle on the EVK
Multimeter and other measurement equipment
A 3 mm flat head screw driver (for turning the SW1 rotary switch knob)
A wire stripper
CY4500 EZ-PD Protocol Analyzer
1.2 Getting Started
For instructions on how to run a quick demonstration and observe the kit functionality, see the Kit Operation section.
CY4533 EZ-PD™ BCR Evaluation Kit Guide, Document Number: 002-25263 Rev. *B
5