Cypress MB95F330H Jak to zrobić - Strona 6

Przeglądaj online lub pobierz pdf Jak to zrobić dla Płyta główna Cypress MB95F330H. Cypress MB95F330H 14 stron. How to make on-board debug

F²MC - 8FX Family, MB95200 Series, How to make on-Board Debug

Figure 6. In-system Debugger Interface

Pin 4 of the connector is used to connect to the reset circuit. Design a switch K1 between the reset circuit and the

reset pin (RSTX). When debugging operation is over, K1 can be switched on to supply the reset circuit to the target

MCU.

www.cypress.com

Document No. 002-05390 Rev.*A