Cypress CCR-8 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Konwerter mediów Cypress CCR-8. Cypress CCR-8 12 stron. Multisystem color corrector

Drukuj stronę

Operation

Front panel

1
2
Standby
Power
3
4
1
Standby / Power Select:
1
When power adapter is pluged in, the CCR-8 enters into standby mode,
the Standby LED illuminates.The unit can be further powered on by
pressing the power button either on the remote or on the front panel.
Press the POWER button to turn on the machine. The Standby LED goes off
and one of the input indicators illuminates.The unit is in operation mode.
Press the POWER button again to re-enter into standby mode.
To entirely power off the unit please unplug the power adaptor.
Input Source Select: Press one of four input buttons to select your
2
desired video input source
1 button: Press to select composite video 1 as input source
2 button: Press to select composite video 2 as input source
3 button: Press to select S-video 3 as input source
4 button: Press to select S-video 4 as input source
Rear Panel

Video Output

1 Composite 1- RCA connector for composite video out 1
2 Composite 2- RCA connector for composite video out 2
3 S-Video 3 - S -Video jack output 3
4 S-Video 4 - S-Video jack output 4
Video Intput
5 Composite 1- RCA connector for composite video input 1
6 Composite 2- RCA connector for composite video input 2
7 S-Video 3 - S-Video jack intput 3
8 S-Video 4 - S-Video jack intput 4
DC Input - 7.5 VDC input (center positive)
Input Selection
1
2
3
4
2
Video Output
Composite
S-Video
1
2
3
Menu/Exit
-
3
Composite
1
2
4
5
6
Multisystem Color Corrector
Model CCR-8
+
Red
Green
4
Video Input
DC 7.5V
S-Video
500mA
3
4
7
8
Blue
3