1010music Toolbox Podręcznik użytkownika - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt nagrywający 1010music Toolbox. 1010music Toolbox 16 stron.
Również dla 1010music Toolbox: Skrócona instrukcja obsługi (2 strony)

Drukuj stronę

1010music Toolbox Podręcznik użytkownika

outputs. When a MIDI stop signal is received, the module stops playback and passes this signal along to the MIDI

outputs.

Toolbox can also drive a clock signal to other modules in a few different ways. You can use the four MIDI outputs to

output the MIDI clock to other modules. You can also use a Gate Sequencer to configure your own custom clock

signal that will go out the corresponding Gate output jack. In this way you could create a repeating sequence of

1/16

notes to generate an analog clock.

Preset Management

A preset is a set of pre-configured sequences, function generators and modulators. You can use the 1010music

presets or create your own presets to save your work.

Select a Preset

To select a preset:

Press the HOME button to display the Main screen if needed.

Cycle through the presets by touching the

Screen on either side of the name of the preset (e.g. STABS in Figure 2: Main

Screen Overview above).

Alternatively, you can touch the name of the preset or the space above it to display

the Preset Selection screen.

Turn a Control Knob to select the desired preset.

10. Touch

to load the selected preset and go back to the Main screen.

Load

Save a Preset

Toolbox does not automatically save your changes to presets. You have to manually save by

following these steps:

From the Main screen, touch the preset name to display the Preset Selection screen.

Touch

to display the Preset Edit Submenu.

Edit

Touch

to save the changes to the preset and return to the Main screen.

Save

Copy a Preset

If you prefer not to start with a blank slate, you can copy an existing preset.

From the Main screen, touch the preset name at the top of the grid to display the

screen.

Presets

Touch the

button at the top of the Touch Screen to display the

Edit

menu.

Edit

Use a Control Knob to select the preset you want to copy, and then touch the

button. Toolbox creates a copy of the preset that appears above the source

Copy

preset in the list. The name of the copy is the name of the source preset with " 2"

appended to the end.

Rename a Preset

Here's how to give a preset a new name:

From the

Presets

Screen to display the

Use a Control Knob to select the preset you want to rename, and then touch the

button. Toolbox displays a touch screen keyboard you can use to enter a

Rename

new name. Touch the

screen.

Presets

P. 14

11/23/17 10:32 AM

and

screen, touch the

button at the top of the Touch

Edit

menu.

Preset Edit

button to save the changes and go back to the

return

Digital Heart – Analog Soul

buttons at the top of the Touch

–

Preset

Toolbox User Manual

Figure 1 7 : Preset

Selection Screen

Figure 1 8: Preset E dit

Submenu

Figure 1 9 : Preset E dit

Figure 2 0: Preset

Na ming Keybo ard