Ashly P70-400 Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Ashly P70-400. Ashly P70-400 6 stron. 70 volt power amplifiers

MOSFETS also do not have a "storage time" associated with them (a

phenomenon found in bipolar transistors in which a certain amount of time is

required to turn the transistor off). Therefore the MOSFET is said to be a "fast" device

which can function very accurately with high amplitude/high frequency signals

and transient waveforms.

The unmatched reliability of the power MOSFET output devices and the

integrity of the rugged mechanical design of the P70 series amplifiers ensure years

of maintenance-free service.

UNPACKING

As a part of our system of quality control, every Ashly product is carefully

inspected before leaving the factory to ensure flawless appearance. After unpack-

ing, please inspect for any physical damage. Save the shipping carton and all

packing materials, as they were carefully designed to reduce to minimum the

possibility of transportation damage should the unit again require packing and

shipping. In the event that damage has occurred, immediately notify your dealer

so that a written claim to cover the damages can be initiated.

The right to any claim against a public carrier can be forfeited if the carrier

is not notified promptly and if the shipping carton and packing materials are not

available for inspection by the carrier. Save all packing materials until the claim has

been settled.

POWER

Connect the P70 series amplifier to a standard 3-wire grounded electrical

outlet supplying 120 volts, 50-60 Hz (some export models are wired for 240 volts).

The power consumption is given in the Specifications section.

STANDARD CONNECTIONS AND CONTROLS

The rear panel of a P70-800 amplifier with the standard input panel is shown

in figure 1. For descriptions of other input options available, see the section on input

options.

Ashly P70 Owners Manual

Page

DIMENSIONS

Page