Cypress CY8CKIT-031 Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt komputerowy Cypress CY8CKIT-031. Cypress CY8CKIT-031 2 stron. Psoc capsense expansion board kit
Drukuj stronę5
Programming with PSoC 3 Development Kit
1. Plug the USB cable into your PC and the
J1 of PSoC 3 Development Kit.
2. Open BMM_USB_KIT-030 example
project from PSoC Creator Start page.
3. Click the Program icon on PSoC Creator
to program the board.
4. Unplug USB cable to disconnect power
from the board.
For the latest information about this kit visit
www.cypress.com/go/CY8CKIT-031
© 2011 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks
referenced herein are the properties of their respective owners.
®
PSoC
CAPSENSE
QUICK START GUIDE
CY8CKIT-031 Hardware Overview and Features
2x20-Pin
Connector for
DVK Interface
1x5 Pin Connector for I2C Interface
®
EXPANSION BOARD KIT
6
Test PSoC CapSense EBK with PSoC 3 DVK
1. Connect J1 of PSoC CapSense Expansion
Board Kit (EBK) to Port D of PSoC 3
Development Kit (DVK); connect J2 to
Matrix Button Module Kit.
2. Connect USB cable to J2 of PSoC 3
Development Kit.
3. Touch a button; the corresponding row
and column LEDs turn on.
2x22 Pin
Connector for
CapSense
Interface
DOC#: 001-66478 REV. **