Cypress CLUX-22HC Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik Cypress CLUX-22HC. Cypress CLUX-22HC 16 stron. Hdmi/cat6 to hdmi/cat6 splitter switcher

Drukuj stronę

source equipment such as DVD player or set-top-box.

CAT6 IN: These slots are for connecting the Video/DDC input to the

⑤

Video/DDC output of the transmitter unit with CAT6 cables.

[Note]:

1. Cable tested with CAT-6E / 23AWG / was solid, so any cables with

different speciﬁcations might result in a different distance.

2. The cable distance was tested with a PS3 40G and 37" SamSung 12

bits LCD TV.

3. The ﬁgures provided in this manual are for reference use only, actual

results depend on your speciﬁc conﬁguration, i.e.: your source and

display and type of cabling used.

DC 5V: This is the slot where you insert the 5V DC power supply for

⑥

electrical power before plugging the adaptor into an AC wall outlet.

7.1 Rear Panel

CAT6 OUT: Connect the Video/DDC output to the Video/DDC input of

①

the receiver unit using CAT6 cables.

HDMI OUT: Connect HDMI output port to the HDMI display.

②

HDCP indicators: When the input source has HDCP protection the HDCP

③

LED will turn on.

The LED light will turn when the HDMI or DVI source has been connected.

④

HDMI/CAT6 input indicator: The LED light will turn on when the HDMI or

⑤

CAT6 source has been selected.

Link OUT: The LED light will turn on when the display has been connected.

⑥