Cypress HX3 CY4609 Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przełącznik Cypress HX3 CY4609. Cypress HX3 CY4609 2 stron. Usb 3.0 hub reference design kit rdk
Drukuj stronę
HX3 USB 3.0 HUB REFERENCE DESIGN KIT (RDK)
5-V DC
Supply
Jack (J1)
5-V to 3.3-V
Regulator (U2)
Suspend
Status LED
(SUSP)
Power LED
(PWR)
Kit Operation: CY4609 is the reference design kit for CYUSB3304-68LTXC, a 4-port USB 3.0 hub controller from
Cypress. The hub controller supports Low-Speed (LS), Full-Speed (FS), Hi-Speed (HS) and SuperSpeed (SS) peripherals
on all the four downstream ports. It goes into Suspend state to save power when the upstream port is not connected to
a PC / laptop. All the downstream ports are compliant to USB Battery Charging Specification v1.2; they also emulate
Apple charging. The hub controller also supports Ghost Charging, a unique feature where the downstream ports
emulate Dedicated Charging Port (DCP) to support battery charging even when the upstream port of the board is not
connected to a PC / laptop.
The hub controller can be configured for parameters such as vendor ID, product ID, etc. using a Windows based PC
tool named Blaster Plus. The configured values are stored in an on-board EEPROM. To access the Blaster Plus tool, the
kit user guide, and the hardware design files, download the RDK EXE file (CY4609HX3RDKSetup.exe) from
www.cypress.com/go/CY4609. Click the EXE file and follow the steps in the installer window.
For the latest information about HX3 products, visit
© 2014 Cypress Semiconductor Corporation. All rights reserved.
All trademarks or registered trademarks referenced herein are the properties of their respective owners.
Doc.#: 001-90183 Rev.*B
CY4609 QUICK START GUIDE
Downstream Port 4
(DS4 / J4)
Downstream Port 3
Downstream Port 2
(DS3 / J3)
www.cypress.com/hx3
USB 3.0 Upstream Port
(US/J8)
Downstream Port 1
(DS2/ J5)
(DS1/ J9)
Configuration
Mode Select
Jumpers (J6 and J7)
HX3 (MPN:
CYUSB3304-
68LTXC)
Sensitive Area -
Do not touch
Reset Switch
(SW1)