Cypress CapSense CY3280-MB Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kontroler Cypress CapSense CY3280-MB. Cypress CapSense CY3280-MB 2 stron. Mechanical button replacement (mbr)

Drukuj stronę

MECHANICAL BUTTON REPLACEMENT (MBR)

ENSE

• Insert the provided batteries into the battery

holder on the reverse of the kit.

• Keep the kit on a stable surface and touch the

power button*; the power LED will glow.

• Ensure SW1 is in the Toggle On position and

SW2 is in the Sleep Off position.

• Add parasitic capacitance to BTN2 by inserting

the provided 22 pF external capacitor to

connector J5, with the marking facing up.

• Turn off and turn on the kit by touching the

power button twice.

• Test BTN 2; SmartSense

compensates for the change in capacitance.

• Repeat with other external capacitors; BTN 2

works with up to 40 pF of parasitic capacitance.

Note* : The power button is set to be less responsive than the other buttons to prevent false starts of the kit.

Once the kit is powered on, the power button is more sensitive to enable easy power cycling.

CY3280-MBR QUICK START GUIDE

Auto-tuning

• Turn off and turn on the kit by touching the

power button twice.

• Touch any button; the corresponding LED

will glow.

• Touch the same button again; the corresponding

LED toggles off.

• Repeat with different buttons.

• Remove the external capacitor.

• Place the 1 mm overlay over the buttons.

• Turn off and turn on the kit by touching the

power button twice.

• Test the buttons; SmartSense Auto-tuning

compensates for the change in

overlay thickness.

• Repeat with the 3 mm overlay.