Ashly 24.24M Uwagi techniczne i specyfikacje - Strona 2
Przeglądaj online lub pobierz pdf Uwagi techniczne i specyfikacje dla Sprzęt komputerowy Ashly 24.24M. Ashly 24.24M 2 stron. Matrix processors
Drukuj stronęGeneral Specifications Protea System II 24.24M
Input: Active Balanced, 18 kohms
Max Input Level: +20 dBu
Input Gain Range: -50dB to +12dB, selectable polarity
Output: Active Servo Balanced, 112 ohms
Max Output Level: +20 dBu
Output Gain Range: -50dB to +12dB, selectable polarity
Frequency Response: 20 Hz-20kHz, ±0.25 dB
THD: <0.01% @1 kHz, +20 dBu
Dynamic Range: >110 dB (20 Hz-20 kHz) unweighted
Output Noise: <-90 dBu unweighted
Mic Preamp
Gain: 0dB, +40dB, +60dB
Phantom Power: +48VDC (9.6ma/input)
EIN: -128dBu, 20-20KHz, 50 ohm source
Eq Filters
Number: 15 per Input, 15 per Output
Selectable As:
Parametric
Bandwidth: 1/64th Octave to 4 Octave
Range: +15/-30dB, 0.1 dB increments
Frequency Resolution: 1Hz
Low-Shelf
Slope: Selectable 6 or 12dB/Octave
Frequency Range: 20Hz to 2KHz
Range: +/-15dB, 0.1dB increments
High-Shelf
Slope: Selectable 6 or 12dB/Octave
Frequency Range: 3.886KHz to 20KHz
Range: +/-15 dB, 0.1 dB increments
All-Pass
Type: Second-Order (-180 degrees)
Frequency Range: 20Hz to 20KHz
Crossover Filters
High Pass Filter
Type: Linkwitz-Riley, Bessel, Butterworth
Slope: 12, 18, 24 and 48dB/Octave
Frequency Range: Off to 20KHz, 1Hz increments
Low Pass Filter
Type: Linkwitz-Riley, Bessel, Butterworth
Slope: 12, 18, 24 and 48dB/Octave
Frequency Range: Off to 20KHz, 1Hz increments
Rear Panel Protea System II 24.24M
Applications:
Corporate Boardrooms, Restaurants, Courtrooms, Houses of Worship, Left/Center/Right Systems, Auditoriums or Conference Centers
Misc:
Protea System Software for PC control of the Protea 24.24M may be downloaded free from our website. Use it to control the
24.24M, 4.24C, 4.24D, 4.24G, 4.24GS, 4.24PS, 2.24GS and 2.24PS. Download it now to preview the capabilities of the Protea
System II Digital Products. Protea System Software operates on Windows™ 95, 98, 2000, XP and NT platforms.
Ashly manufactures a complete and comprehensive line of Graphic and Parametric Equalizers,
Amplifier Input Options. Please call, write or visit our web site for information on any of these Ashly Products.
Ashly Audio Inc., 847 Holt Road, Webster, NY 14580-9103, Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739
Electronic Crossovers, Power Amplifiers, Compressor-Limiters, Mixers, and
Internet: http://www.ashly.com, email: [email protected]
Delay
Input Maximum Delay: 682.5ms
Increment: 20µs
Output Maximum Delay: 682.5ms
Increment: 20µs
Gate
Threshold: -80 to +20dBu, 1dBu increments
Floor: Off, -80 to 0dBu, 1dBu increments
Attack: .2, .5, 1, 2, 5, 10, 20, 50ms/dB
Release: 5, 10, 20 50, 100, 200, 500, 1000ms/dB
Autoleveler
Target Level: -40 to +20dBu, 1dBu increments
Ratio: 1.2:1, 1.5:1, 2:1, 3:1, 4:1, 6:1, 10:1
Hold Time: 0, 1, 2,3, 4, 5, 6Sec
Threshold Below Target: -30 to 0dB, 1dB increments
Gain Increase Rate: 5, 10, 20 50, 100, 200, 500, 1000ms/dB
Gain Decrease Rate: 5, 10, 20 50, 100, 200, 500, 1000ms/dB
Ducker
Trigger Threshold: -80 to +20dBu, 1dBu increments
Ducker Depth: Off, -30 to 0dBu, 1dBu increments
Ducker Release: 5, 10, 20 50, 100, 200, 500, 1000ms/dB
Cross Point Mixer
Gain: Inf., -50 to +12dB, 1dB increments with Mute
Compressor/Limiter
Threshold: -20dBu to +20dBu, 1dB increments
Ratio: 1.2 :1 to Infinity (1.2, 1.5, 2., 3, 4, 6, 10, 20, Infinite:1)
Atack: 0.5 ms to 50 ms per dB
Release: 10 ms to 1 sec. per dB
Processor
Input A/D: 24 bit
Output D/A: 24 bit
Processors: 24 bit signal, 48 bit filters, 56 bit accumulator
Sample Rate: 48 kHz
Propagation Delay: 1.46 ms
Other
Power Requirements: 90 - 240VAC, 40W
Shipping Weight: 13lbs (Maximum)
Dimensions: 19.0"L x 3.5"H x 8.5"D
Connections: Euroblock
Environmental: 40-120 deg. F, (4-49 deg, C) noncondensing