Ashly PE-1200 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt komputerowy Ashly PE-1200. Ashly PE-1200 13 stron. Pe series high performance professional power amplifiers
Również dla Ashly PE-1200: Uwagi techniczne i specyfikacje (2 strony), Instrukcja obsługi (13 strony), Instrukcja instalacji i obsługi (2 strony), Arkusz specyfikacji (2 strony)

Drukuj stronę

Page - 6

Introduction - 2

The PE Series - 3

Physical Description - 4

Installation – 5

Requirements

Typical Applications

Connectors & Polarity

Operation - 7

Troubleshooting - 8

Spec Table - 9

Measurements - 10

Dimensions - 11

Warranty - 12

Typical Applications

The most common use

of a PE-Series amplifier

is a 2-channel source

driving 2 speaker

channels. In this

illustration, the PE-

Series amplifier is

receiving a signal and

then 'returns' it to a

second amplifier using

the provided

connectors. The

amplifier is in STEREO

mode.

Connectors & Polarity

PE-Series amplifiers utilize several different professional audio connectors. The Euroblock

and Screw-Terminal connectors are clearly marked on the amplifier's rear panel and are

straightforward. The connection polarity for the other three types of connectors (XLR, TRS,

and Speakon) are less obvious. The diagrams below show how each connector should be wired

for proper operation. Be sure to read the Operation section of this manual for important

information on the three operating modes.

Operator Manual – PE Series Amplifiers

Because of their efficient

and high-power design,

PE-Series amplifiers are

well suited to single

channel output to mono

speaker load such as a

subwoofer. This

illustration shows both

PARALLEL and

BRIDGED output

connections using a single

input signal.