Dolphin IBP-G4x16-3 Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt komputerowy Dolphin IBP-G4x16-3. Dolphin IBP-G4x16-3 10 stron.

Step 5 – Connect a power toggle switch or jumper

Connect the cabinet power toggle switch to the pin header marked 'PWR SW' or add a jumper to the 'PWR ON' pin

header. This connects to the ATX power-supply Power-good pins and signals the PSU unit to start and provide power.

With a toggle switch, the ATX PSU can be left switched on, and power to the device can be controlled with this switch,

while with a jumper, the expansion system can be turned on or off with the ATX PSU power switch.

Step 6 – Connect the cabinet FANs

To ensure proper cooling for the Dolphin uplink card and the Plug-On cards, you must always install and connect the

appropriate number of fans. The fans can be connected the FAN and FANA1 pin headers. Using the IBP-G4x16-3 without

fans is not possible and will void the warranty of your Dolphin uplink card and possibly destroy your Add-On cards.

More information about the product, support and software downloads at

[email protected] if you have any questions.

IBP-G4x16-3 User's Guide

https://www.dolphinics.com

Please email pci-

Page 8