Asian Phoenix Resources PowerPal MHG-500LH Instrukcja obsługi i konserwacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Przenośny generator Asian Phoenix Resources PowerPal MHG-500LH. Asian Phoenix Resources PowerPal MHG-500LH 13 stron. Low head micro-hydroelectric generator

Drukuj stronę

1. Read this First

•

Low frequencies will result if the generator rotor is rotating slower than usual.

Low frequencies may prevent proper functioning of appliances such as televisions

and will harm electric motors. PowerPal is designed to stop working if the rotor

speed becomes too low, as the drag on the rotor becomes too great to sustain its

rotation. This in-built mechanism is there to avoid problems associated with low

frequencies. High frequencies will occur if the rotor is rotating faster than usual.

This is due to either a high water flow rate or the use of a small load. It can be

corrected by adjusting the flow gate, or by turning on another appliance to

increase the load. High frequencies do not normally damage electric motors or

affect television picture quality. Light bulbs are not affected by frequency but are

affected by voltage.

POWERPAL COMPONENTS

Inside your PowerPal box you will find:

•

1 x generator-turbine assembly

•

1 x electronic load controller

•

1 x spare lower bearing, ELC fuses

•

1 x Guarantee Card

•

1 x this instruction manual.

Please advise immediately if any parts are missing. Complete your Guarantee Card

and have it signed by your PowerPal dealer.

The PowerPal system consists of two major components – a hydroelectric generator

and an electronic load controller. Other components are necessary and these can be

manufactured locally. The water intake canal can be made from tin plate, wood,

fiberglass or concrete. The water outlet pipe is usually made from tinplate. Your

PowerPal dealer can advise you about this.

Therefore, other parts which are not included in the box but which are required to

make PowerPal work are:

•

1 x water intake canal

•

1 x water outlet pipe

•

electrical wire from generator to house. See the section on 'Technical

Specifications' for the correct size wire.

•

household wiring.

These are available from your dealer or local electrical store.

SYSTEM DIAGRAM

The following diagram shows how the non-electrical components fit together. Further

reading of this manual will provide the necessary expl a nations. The components are:

PowerPal™ Low Head 3