Cypress Semiconductor MiniProg3 Podręcznik użytkownika - Strona 13

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Płyta główna Cypress Semiconductor MiniProg3. Cypress Semiconductor MiniProg3 20 stron.

2.4

Example Projects

MiniProg3 is supported by PSoC Programmer, a simple GUI that connects to programming

hardware to program and configure PSoC devices, and to develop custom applications.

Example projects and documentation are included in the PSoC Programmer installation and are

available in the PSoC Programmer root installation folder:

[Install path]\Cypress\Programmer\[Programmer Version]\Examples

The PSoC Programmer root installation folder also includes documentation on how to use the

programming interface:

[Install path]\Cypress\Programmer\[Programmer Version]\Documents

2.5

MiniProg3 has five indicator LEDs that, when lit, indicate the following:

Upper Left - Busy (Red): An operation (such as programming or debugging) is in progress.

■

Lower Left - Status (Green): The device is enumerated on the USB bus. When flashing, this

■

LED indicates that MiniProg3 has received USB traffic.

Upper Right - Target Power (Red): MiniProg3 is supplying power to the target connectors. This

■

LED does not light up if power to target connectors is supplied by a source other than MiniProg3.

Lower Right - Aux (Yellow): Reserved for future use.

■

Middle - No Label (Yellow): Flashes briefly during the initial configuration of the device. If it stays

■

lit, this LED indicates that a configuration error has occurred. If this happens, disconnect the

MiniProg3 from the USB port and then reconnect it.

CY8CKIT-002 MiniProg3 User Guide, Doc. # 001-59350 Rev. *E

Installing MiniProg3