Asiatelco AWP-S Series Podręcznik użytkownika - Strona 15

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon Asiatelco AWP-S Series. Asiatelco AWP-S Series 15 stron. Cdma fixed wireless phone

12 Technical Parameters

Dimensions
Weight
Air Interface
Vocodec
Charger AC Input
Charger DC Output
Backup Battery
Operation Temperature
Range of Humidity
13 Quick Troubleshooting Guide
Unable to send/receive data/fax calls: Check the connections to computer and verify that necessary
software has been properly installed and configured.
Moisture or ventilation problems: Visually inspect the phone body, moisture can damage the phone.
Ventilation is also very important. Move the phone to improve the ventilation as necessary.
No power: Verify that AC power source and its corresponding circuit breaker are functioning properly.
If Phone can't make data connection:
Make sure to follow Modem installation procedures
Make sure that you have purchased CDMA1x service from your CDMA service provider
Make sure that both PC's modem driver and proper software are installed correctly
Unable to receive incoming calls:
Make sure that the incoming call is not restricted;
Make sure the FAX/DATA mode setting is OFF
Make sure that your Phone is having good signal reception
Unable to make outgoing calls:
Make sure that the numbers you dialed are not restricted;
Make sure that your Phone is having good signal reception
Unable to receive SMS: Make sure that your Phone's memory is not full for storing SMS. If the memory is
full, please empty inbox.
While charging the battery, DON'T disconnect the charger before the battery is fully charged.
REMEMBER: You can always use Load Default sub-menu in Security menu to restore all original phone
settings.
AsiaTelco Technologies Co.
AWP-S Series
CDMA Fixed Wireless Phone
User Manual
202(L) x175(W) x63(H) mm
<1.0kg
IS-95A/B, IS-2000
13K QCELP & 8K EVRC
90 ~ 240 VAC, 50~60Hz
6.6VDC @800mA
3.6V/1500mAh Ni-MH Rechargeable Battery
-10℃~ 50℃
5% ~ 95% RH
Proprietary/Confidential
Rev.:
R1.0
12