Cyrus 6vs Instrukcje użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Wzmacniacz Cyrus 6vs. Cyrus 6vs 7 stron.

Drukuj stronę

User Instructions

TROUBLESHOOTING GUIDE

If your Cyrus 6vs/8vs is not operating properly, disconnect the power and

check carefully all connections.

If you are in any doubt, consult your dealer.

No sound

Amplifier switched off or in Standby

Mute is on (RED light on Vol. Ring)

Tape Monitor on (RED tape light)

Source not working

(e.g. CD not playing)

No sound from one loudspeaker

BAL control at extreme limit

Does your speaker have fuses?

Speaker cables / interconnects faulty

Spurious noises from speakers

Interconnects or connections faulty

No response from any keys

Switch off at rear panel, wait one minute and switch on.

The problem should clear

The Cyrus 6vs/8vs has a unique fault indication system to help you to

diagnose problems. All fault indications appear on the Standby light on the

front panel.

Fault Indications during use

Flashing Green and Yellow

An overload condition usually

caused by excessive level or a

problem with your loudspeakers

Flashing Red

An internal problem with Cyrus

6vs/8vs or PSX-R

Remote control not working

Remote control not operating

Remote control will not operate a

Cyrus CD player or tuner

If a fault condition still remains, return the Cyrus 6vs/8vs (together with the

PSX-R if you are using one) to your Cyrus appointed dealer or an

authorised Service Centre.

Bring unit out of Standby

(Standby light - GREEN)

Deselect Mute

De-select TAPE

See 'Fault Indication System'

Centralise Balance

Check speaker, replace fuses

Check connections, cables -

replace if needed

Check, replace where necessary

Reduce level or Unplug speakers

amplifier should restore

Switch off and on - amplifier should

restore

Check batteries

CD, TU or AV button must be

pressed before sending a command

WARRANTY

The warranty card enclosed should be completed by the Dealer and the

purchaser and returned to CYRUS or its Distributor within 8 days of

purchase. No Dealer or Distributor may vary the terms of this warranty,

which is personal to the original Purchaser and is not transferable.

Please retain the sales receipt as proof of purchase.

Warranty claims must wherever possible be made through the Dealer

from whom the equipment was purchased.

This warranty excludes:

•

Damage caused through neglect, accident, misuse, wear and tear,

or through incorrect installation, adjustment or repair by

unauthorised personnel. Any unauthorised servicing will result in

loss of warranty.

•

Liability for damage or loss occurring in transit to or from the

purchaser.

•

Consequential damage, loss or injury, arising from or in conjunction

with this equipment.

Equipment for attention under warranty should be consigned return

carriage paid. If returned equipment is found to comply with the

published specification, CYRUS reserves the right to raise a charge.

The above conditions do not affect your statutory rights as a

SPECIFICATIONS

Power Supply

Voltage: .......................................................................... As plate on rear of unit

Power Consumption

Standby ..................................................................................................... (12W)

ON (No Load) ............................................................................................ (23W)

Maximum......................................................... Cyrus 6vs....................... (130W)

EMC & Safety Compliance (230V).................................................................CE

EMC & Safety Compliance (115V)............................................... FCC, cCSAus

Enclosure

Dimensions (WxHxD)............................................................ 215 x 75 x 365mm

Weight ............................................................. Cyrus 6vs......................... 3.7Kg

Material......................................................................................Die cast chassis

Audio Performance Cyrus 6vs

Input Sensitivity (40W/8Ω).............................. Line................................ 179mV

Input Impedance ............................................. Line...................................40kΩ

Frequency Response (-3dB) ........................... Line.................... 0.25Hz, 90kHz

Signal to Noise Ratio (A-WTD) ....................... Line............................... 102dBA

Power Output (both channels driven).............. 8 Ohms .............................. 40W

THD+N (Pre-Amp) 1kHz ................................. Line............................. <0.002%

THD+N (1kHz, 2/3 power)............................... 8 Ohms ....................... <0.003%

(both channels driven)

Audio Performance Cyrus 8vs

Input Sensitivity (70W/8Ω).............................. Line................................ 237mV

Input Impedance ............................................. Line...................................40kΩ

Frequency Response (-3dB) ........................... Line...................... 0.1Hz, 90kHz

Signal to Noise Ratio (A-WTD) ....................... Line............................... 102dBA

Power Output (both channels driven).............. 8 Ohms .............................. 70W

THD+N (Pre-Amp) 1kHz ................................. Line............................. <0.002%

THD+N (1kHz, 2/3 power)............................... 8 Ohms ....................... <0.003%

(both channels driven)

Cyrus reserves the right to change all specifications without notice. E &OE

Cyrus 6vs & Cyrus 8vs

consumer.

Cyrus 8vs....................... (360W)

Cyrus 8vs......................... 5.6Kg