Cyrus aEQ7 Instrukcje użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Wzmacniacz Cyrus aEQ7. Cyrus aEQ7 13 stron.

Drukuj stronę

INSTALLATION

CONNECTING A TURNTABLE

Most turntables will be provided with a suitable signal

cable terminated with RCA phono plugs. If, however your

turntable uses phono sockets and no interconnect cable has

been provided, please refer to the Additional Information

section on page 9 for guidance.

Input Connections

1. Ensure the grounding lead is securely connected to the

correct input ground terminal.

2. Plug the RCA connectors of your tone-arm lead into

the appropriate rear panel input sockets c or d.

Observe the colour coding of the phono plugs for left

and

right

channel

convention is– Right Channel RED, Left Channel

WHITE or BLACK.

3. If you are using only one turntable, plug the shorting

plugs into the unused input sockets.

Always check the technical specification of source

products before connecting them to your Cyrus aEQ7. If

you are unsure of your cartridge type we suggest you

connect it into the MM input.

Note: Connecting a MM type cartridge to the MC sockets

will overload the input and may damage your amplifier

and loudspeakers.

Consult your dealer if in doubt.

English

identification.

The

standard

OUTPUT CONNECTIONS

The output sockets e of the Cyrus aEQ7 should be

connected to a line level input on your pre-amplifier.

For maximum functionality we recommend the following

inputs when connecting the Cyrus aEQ7 to other Cyrus

products.

Cyrus aCA7

Cyrus IIIi, Cyrus Pre

*By changing the existing phono module internally, the

Phono input (PH) of the Pre and IIIi can be modified to a

line level input precisely matched to the Cyrus aEQ7.

Note: only an appointed Cyrus dealer should perform this

operation.

Cyrus III

Cyrus AV master, Cyrus MR3

Cyrus SL

For making connections use a high quality screened

interconnect. Be careful not to confuse left and right

channels. The standard convention for phono connections

is: Right Channel RED, Left Channel WHITE or BLACK.

Cyrus aEQ7

Use the AUX2 input

Use the Phono (PH) input*

Use AU, CD or TU input

Use any input