Cyrus IIIi Instrukcje użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Wzmacniacz Cyrus IIIi. Cyrus IIIi 13 stron. Integrated

Drukuj stronę

Cyrus llli

Welcome to the world of Cyrus!

Congratulations on your choice of Cyrus Hi-fi products. Our state-of-the-art

design technology and outstanding quality of manufacture has won

countless awards around the world. We are confident that you will derive

great pleasure from owning a product from one of the most recognised

and respected manufacturers of hi-fi equipment.

Please read these instructions carefully before commencing installation.

They provide full guidance to help you install your Cyrus llli safely and

correctly.

Preparations for Installation

Before installing the Cyrus IIIi check that the following items are included

in the accessory box.

•

Warranty Card (with instruction manual)

•

Power Cable

•

Remote Handset

•

4 Loudspeaker Plugs

After removing these items, please retain the packaging.

Install the Cyrus IIIi in a well ventilated location away from sources of high

temperature, dust or humidity. Never stand the Cyrus IIIi under another

unit or on any surface likely to hamper its cooling or ventilation.

INSTALLATION

(Refer to Fig 1)

Key to the rear panel drawing:

Right Speaker Output

MC-BUS System Connection

Pre-Amplifier Output

Tape Recorder Output

Tape Input

SP-Input

Phono Input

Aux Input

Connecting to the AC Mains Supply

Connect the socket on the supplied AC Power cable to the Power inlet

the rear panel of the Cyrus llli. Now connect the cable to a suitable AC

power point.

The mains power switch

on the rear panel of the Cyrus IIIi should be

left on for normal operation, except when left unattended for a long period

when it should be switched off or disconnected from the AC supply.

Connecting Signal Inputs

Connect the output cable from the turntable to the phono input - PH

Follow the colour coding of the plugs. If the turntable has a ground wire

fitted, connect this to the ground connection

The phono input of the Cyrus IIIi is suitable for use with either moving

magnet or high output moving coil cartridges. If required, the phono input

can be converted to an extra line input by your dealer.

Connect a phono cable between each component and the sockets as

marked on the rear panel. Ensure left and right channels are correctly

connected. The Cyrus IIIi has inputs for CD Player -CD

, a Home Theatre decoder - VI

which can be used to connect a wide variety of products. Check

the specification of these products before connecting to your Cyrus IIIi.

You will need two phono cables. Connect one cable from the Output or

Playback sockets of the tape deck to the Tape Input - TP IN

Cyrus IIIi and a second cable from the Input or Record sockets of the

tape deck to the Tape Record Output - TP OUT

IIIi.

Video Input

10. Tuner Input

11. CD Input

12. Left Speaker Output

13. PSX-R Connection

14. Turntable Ground

15. Power Inlet

16. Mains Fuse Holder

17. Power Switch

of the Cyrus IIIi.

, a tuner - TU

and two auxiliary inputs - AU

sockets of the Cyrus

Connecting Loudspeakers

Fit the supplied plugs to the loudspeaker cables making sure to line up +

and - at each end. Most cables have polarity indicators and may also be

marked for directionality. The + and - terminals of the Cyrus IIIi must be

connected to the corresponding + and - terminals of the loudspeakers.

Having ensured that your connections are secure, connect the left and

right loudspeakers to the rear panel sockets

MC-BUS System

Connecting the MC-BUS sockets

system provides unified system control. An MC-BUS loop is established

by connecting single phono cables from the MC-BUS output of one unit to

the MC-BUS input of another in a daisy-chain. Complete the loop by

returning the MC-BUS output of the final component to the MC-BUS input

of the first.

With MC-BUS established you can control the power function of the entire

system from the Cyrus IIIi, from the front panel or remote control.

Selecting 'CD' from the front panel will switch on the Cyrus IIIi, the Cyrus

Power and a Cyrus CD player. When the Cyrus IIIi is set to Standby, the

entire system will also switch off.

When a Cyrus AV-master is in the MC-BUS loop, setting of the volume

calibration level will take place automatically when Cyrus IIIi's. VI input is

selected. Refer to the Cyrus AV-master handbook for further details.

External Regulated Power Supply - PSX-R

The PSX-R is a unique DC power supply which will upgrade the sonic

performance of your Cyrus IIIi and enhance its current drive. When a

Cyrus IIIi / PSX-R combination is installed, analogue and signal related

sections of the Cyrus IIIi are powered from this clean, stable power

source while other requirements are supplied internally. This ensures

complete isolation of control circuits and sensitive analogue sections

reducing AC mains-borne noise and power supply ripple.

To connect the PSX-R to the Cyrus IIIi plug the connector on the

umbilical cord of the PSX-R into the Multi-Pole socket on the rear of the

Cyrus IIIi (

Fig.1) You will need a mains supply for both units.

NOTE- When you add a Cyrus PSX-R to your system it is essential for

your Cyrus IIIi to be modified by your dealer or an authorised Cyrus

service organisation. Connecting the Cyrus PSX-R to a Cyrus IIIi, which

is not correctly modified will result in a fault condition display on the Cyrus

IIIi. (see page 4 for further details.)

OPERATION

Key to the front panel drawing:

Mute Switch

Standby Switch

Standby Light

Balance

Remote Eye

Level Control

Tape Monitor Switch

Power

When power is applied, the STANDBY key

and

The Standby light

glows red when in standby mode. The Cyrus IIIi will switch from standby

to on, when any input key

When the Cyrus llli is switched on from the rear panel mains switch, it will

of the

perform a self-test and sit in Standby mode. When first switched on from

standby the CD input is automatically selected and the volume is set to

minimum.

After the Cyrus llli as been operational and the unit is switched back into

Standby mode, all settings for input selection and Volume/Balance are

retained.

User Instructions

and

(Refer to fig's 1 & 7)

of the Cyrus IIIi in an MC-BUS

(Refer to fig 2)

SP Input

Auxiliary Input

10. Video (AV) Input

11. Tuner Input

12. CD Input

13. Phono

is used for power control.

shows green when the Cyrus IIIi is operating and

is selected.

of the Cyrus IIIi.

G B