Cyrus SE series Instrukcje użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Odtwarzacz CD Cyrus SE series. Cyrus SE series 6 stron.

Drukuj stronę

User Instructions

Welcome to the world of Cyrus!

Congratulations on your choice of Cyrus Hi-fi products. Our state-of-the-art

design technology and outstanding quality of manufacture has won countless

awards around the world. We are confident that you will derive great pleasure

from owning a product from one of the most recognised and respected

manufacturers of hi-fi equipment.

Please read these instructions carefully before commencing installation. They

provide full guidance to help you install your Cyrus CD player safely and

correctly.

Cyrus CD8, CD6, CDXt model differences

These user instructions are for the Cyrus CD8, but also refer to the CD6 and

CDXt CD players. Model differences are indicated in the text where they

occur.

Preparations for Installation

Before installing the CD8 check that the following items are included in the

accessory box.

•

Warranty Card

•

AC Mains Cable

•

Remote Control Handset

•

2 x Phono leads for MC-BUS connection

After removing these items, please retain the packaging.

Install the CD8 in a well ventilated location away from sources of high

temperature, dust or humidity. Never stand the CD8 under another unit or on

any surface likely to hamper its cooling or ventilation.

INSTALLATION

(Refer to Fig.1

Key to the rear panel drawing:

1. Audio Outputs*

2. Optical Output

3. Digital Output**

* CD8 & CD6 only

Connecting to the System Amplifier

Connect a suitable stereo RCA phono interconnect to the audio output

sockets

of the CD8 and the corresponding input of the amplifier or receiver.

Amplifier inputs suitable for this purpose are CD or AUX inputs.

Dual outputs are provided for convenient connection to multiroom units or for

direct connection to tape/disc recorders etc.

DO NOT connect the CD8 to the PHONO input of the amplifier, as this could

damage your amplifier or speakers.

Connecting an External D/A Converter

The CD8 provides a digital output to drive an external D/A converter. Using a

digital interconnect, connect the DIGITAL OPTICAL

(CD8, CDXt only) to the input of a suitable D/A converter and connect the

converter's audio outputs to a suitable input of the amplifier. Refer to the D/A

converter handbook for guidance.

The DIGITAL COAXIAL connection is recommended where this connection is

available.

Connecting a Cyrus PSX-R

The Cyrus PSX-R is a high quality regulated power supply, the use of which

will elevate your CD8 into a true world-class state-of-the-art product.

The connector fitted to the umbilical cable from the PSX-R must be securely

connected to the PSX-R socket

fitted, the connector will latch into the socket.

Note: The PSX-R power supply and the CD8 will both require connection to

the mains supply.

MC-Bus System Connection (Optional)

By using the MC-BUS connection on your CD8, a highly functional integrated

system with full remote control may be set up. This feature is usable if you

own a Cyrus amplifier. Refer to the relevant product handbook for MC-BUS

wiring instructions.

)

4. MC-Bus System

5. PSX-R Connection**

6. Power Inlet

**CD8 & CDXt only

(CD8 and CD6 only)

or DIGITAL COAXIAL

(CD8 and CDXt only)

on the rear of the CD8. When correctly

Cyrus SE series CD players

OPERATION

(Refer to Fig.2)

Key to the front panel drawing:

1. CD Loading Slot

2. Standby Key

3. Standby Light

4. Remote Eye

5. Display Window

6. Stop/Eject

Switching On

The mains power to the CD8 should normally be left on unless left unattended

for a long period when the mains power at the wall socket should be switched

off or the product disconnected from the AC supply.

When power is applied, the STANDBY key

Standby light

shows red when the CD8 is in Standby and green when

operational.

Loading a Disc

Before loading a disc, check that the display reads 'No Disc', indicating that a

disc is not already loaded. To load a disc, hold the disc label side upwards

and place it gently into the CD Loading Slot. Once a third of the disc is

loaded, the disc will be automatically loaded through the front panel. The

display will show 'Reading' while checking the contents of the disc.

Playing a Disc

Press the PLAY/PAUSE key

from track 1 unless otherwise selected.

Pausing

Press the PLAY/PAUSE key

held at the precise point of interruption and the PAUSE symbol will show on

the display. Press the PLAY/PAUSE key

Fast Forward/Reverse

The SEARCH FORWARD

and SEARCH REVERSE

to locate a specific point within a track. The search will commence initially at a

slow speed increasing after a few seconds if the key is held down.

The Search keys will also search through next or previous tracks if held down

long enough.

Previous/Next Track Selection

Pressing the NEXT

or PREVIOUS

backward through the tracks on the CD. Track indications appear on the

display.

Repeat

The REPEAT key

can be used to replay the entire disc or programmed

tracks.

When REPEAT is selected, its symbol shows on the display. Press the key a

second time to clear Repeat.

If a program selection has been stored, the REPEAT key

continuous play of this program sequence.

Stop/Eject Key

When a disc is playing, press the STOP/EJECT Key

immediately.

If the disc is already stationary, one touch of the STOP/EJECT key

eject the CD.

Repeat

Search Forward

Search Reverse

10.

Next Track

11.

Previous Track

12.

Play/Pause

is used for power control. The

on the front panel. Playback will commence

to pause the current track. The disc will be

again to resume playing the disc.

keys may be used

keys allow you to change forward or

to stop the disc

will allow

will