Cyrus PSU-XR Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zasilanie Cyrus PSU-XR. Cyrus PSU-XR 12 stron.

There are no user controls on the PSU-XR front panel.

All functions including standby and configuration are

controlled by the connected Cyrus product via the power

interconnect cable.

The Standby/Status indicator brightness and colour settings

will automatically be set to match the indicator brightness

and colour settings on a connected Cyrus product.

Cyrus PSU-XR

Operation

PSU-XR

1. Standby/Status indicator

In regular use mains power can be left connected

permanently.

When unattended for a long period (holidays etc) mains

power should be disconnected.

When mains power is connected, the Standby/Status

indicator will initially flash to show the firmware version

(refer to the 'Firmware' section of this user guide for more

information), then light red as standby is set.

When a connected product switches on the Standby/Status

indicator will change to the colour of the connected Cyrus

product. This confirms that power is now being supplied

from the PSU-XR.

NOTE: If the PSU-XR remains in Standby then a firmware

update may be required for the connected Cyrus product.

Refer to the 'Support' pages of the Cyrus website www.

cyrusaudio.com to determine whether an update is

required.

There is no energy saving auto-standby setting for the

PSU-XR as it will always set to the same power state as the

Cyrus product it is connected to.

If auto-standby is required it can be enabled at the

connected product.

User Instructions