EG Geneva 500MX Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Rower EG Geneva 500MX. EG Geneva 500MX 9 stron.

Trouble-free, Low maintenance, Long life span and Easy to maintain electric motor –

 High Quality Brushless Electric Mid Drive motor with an advance Pedal torque sensor and

gears.

 Closed system motor requires only surface cleaning and dry storage.

Charging the Battery

 Connect the battery to the charger; ensure the output terminal of the charger and the input

terminal of the battery are firmly connected.

 When the charger is plugged into a wall outlet, the charger LED indicator will turn RED to

indicate that the battery is charging

 The LED indicator on the charger will turn GREEN when the battery is fully charged.

 Disconnect the charger from the wall outlet before disconnecting the charger from the battery.

 To ensure long battery life, fully charge the battery for at least twelve (12) hours during the first

initial three charges and charge the battery at least once for 2-3 hours every 2 months

 ! NOTE: Only charge the battery pack using the supplied charger.

 ! NOTE: Always plug the charger onto the Battery pack before plugging the charger to the wall

socket.

 ! WARNING: Do NOT charge the battery for more than 24hrs for risk of damaging the battery.

！WARNING:

 Inspect the bicycle frequently. Failure to inspect the bicycle and to make repairs or

adjustments, as necessary, can result in injury to the rider or to others. Make sure all parts are

correctly assembled and adjusted as written in the owner's manual.

 Immediately replace any damaged, missing, or worn parts.

 Make sure all fasteners are correctly tightened as written in the owner's manual

 Parts that are not properly tightened can be lost or operate poorly.

 Do not over tighten parts, as over-tightening may damage the part.

 Make sure any replacement fasteners are of the correct type and size.

 Your bike uses an Aluminum Alloy frame. Ensure that the bicycle frame is carefully and

frequently inspected; as Aluminum frames can develop micro fractures from stress, severe

impact and shocks. If you see these micro fractures or cracks, stop riding the bicycle

immediately.

 In case of micro fractures, have the bicycle frame repaired and inspected by a qualified

professional before riding the bicycle again.

NOTE: Have a bicycle service shop make any repairs or adjustments for which you do not have the

correct tools to or if you do not sufficiently understand the instructions set forth in this electric bicycle's

manual.

Inspection of the Bearings Maintenance

1. Frequently check the bearings of the bicycle. Have a bicycle service shop lubricate the bearing

once a year or any time they do not pass the tests as noted in the Bicycle owner's manual.

1. There are 3 serial numbers that are of importance on your EG Electric Bike. They are the

Frame serial number, the Motor serial number and the Battery pack serial number.