EG Vienna 250 EX Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Rower EG Vienna 250 EX. EG Vienna 250 EX 8 stron. Folding electric bicycle

INSTALLATION INSTRUCTIONS

1. Your folding bike is 95% installed. All you need to do is unfold the bike, insert the handle

bar stem and insert the seat. ALL of which are secured using quick releases.

2. To begin, unpack the bicycle from the box and cut all the ties that held the bicycle

together during shipping.

3. Unfold the frame of the bike while gently lifting the Quick Release upward. When the

main frame of the bike has straightened completely, release the quick release and bring

the lever all the way to the front of the bike. Then, securing the quick release.

4. Unfold the Handle stem (where the handlebar fits into) section of the bike. Then, bring the

quick release over to the top portion of the bike and secure the lever.

5. ! WARNING: Please make sure the installed saddle is at least 1/2 inch above the rear

suspension under the seat and that the post must be firmly secured before riding the

bike.

6. Install the saddle and the handle bar for the bicycle. Both the saddle and the handle bar

can be installed by tightening and locking in their respective quick releases.

7. Unfold the pedals by gently lifting them horizontally and they will lock into place.

8. The rear LED reflector takes 2 AAA batteries. To open the LED rear reflector use a Philips