EG Aircraft MX2 50CC Giant Scale Aerobatic Aircraft Podręcznik - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik dla Zabawka EG Aircraft MX2 50CC Giant Scale Aerobatic Aircraft. EG Aircraft MX2 50CC Giant Scale Aerobatic Aircraft 19 stron.
Drukuj stronęoptional servo location
6. The fuel tank is preassembled. Complete the installation in the fuselage using zip ties or velcro straps
to hold the tank in position. Connect a fuel line between the tank and carb, a fuel line between the tank
vent and the bottom of the fuselage, and a fill line to a fueling port which can be mounted on the fuselage
side opposite your ignition switch. Make sure your vent line does not come close to any hot exhaust part
such as the muffler or canister. EG recommends the use of small zip ties or fuel line clamps to secure the
lines to the tank.
7. There are many options for exhaust systems including canisters of all sizes, stock mufflers, and
inverted Pitts style mufflers. Follow the manufacturer's instructions for your exhaust system paying
attention to vibration mounts if required and air flow requirements. Trial fit your exhaust system now and
work out any additional supports, but do not permanently install the system until you fit the cowling in the
next steps.
Optional
servo location
100 cc servo location
Typical fuel
dot location