Askey EAI2001S Instrukcja szybkiej instalacji - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Bezprzewodowy punkt dostępowy Askey EAI2001S. Askey EAI2001S 18 stron. Enterprise access point

Drukuj stronę

Step 4. Configure WDS (Wireless Distribution System) Settings (Optional)

To extend the wireless coverage, EAI2001S supports up to 8 WDS links for connecting wirelessly to other

WDS-capable APs (peer APs). By default, all WDS profiles are disabled.

Click on the Wireless button on the main menu.

Select the Repeater Settings tab.

Choose WDS as the Repeater Type.

Choose the desired WDS profile:

(a) Enable WDS.

(b) Enter the Remote AP MAC Address (peer AP) and then Click SAVE.

If you are using another EAI2001S as the peer AP, simply repeat the above-mentioned steps to configure

another peer AP(s).

On each and every configuration page, you may click SAVE to save the changes of your configured

settings, but you must reboot the system for the changes to take effect. After clicking SAVE, the

Note:

following message will appear: "Some modifications have been saved and will take effect after

APPLY."

EAI2001S Enterprise Access Point

Quick Installation Guide

ENGLISH