Askle Sante WINNCARE automorpho AUTOMORPHO XL Podręcznik użytkownika - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt medyczny Askle Sante WINNCARE automorpho AUTOMORPHO XL. Askle Sante WINNCARE automorpho AUTOMORPHO XL 16 stron.

Drukuj stronę
K

MAINTENANCE/DISINFECTION

RISK OF ELECTRIC SHOCK:
Before any maintenance, disconnect the equipment from its power supply in order to avoid any risk of physical injury or damage to
equipment.
Never expose the equipment to sprayed water.
RISK OF DAMAGE TO THE EQUIPMENT:
You must not use corrosive cleaning products such as industrial degreasing agents, solvents of the acetone type and ether.
You must not use abrasive materials such as steel wool or "ScotchBrite".
Compressor:
Use a cloth lightly soaked with a detergent or surface detergent/disinfectant solution marked CE* at the concentrations for use
recommended by the manufacturer. Observe the remanence time.
Please note: In order to prevent any damage to the compressor through liquid getting inside the casing, please do
not spray the product
Mattress:
Disinfection by hand: use a cloth impregnated with a solution of detergent or surface detergent/disinfectant marked CE* at the
concentrations for use recommended by the manufacturer. Observe the remanence time.
The removable foam base can be replaced in case of alteration [Ref. VAXT3/MS "support x4 Base>5cm"]
* CE marking compulsory under directive 93/42/CEE for products claiming that they are suitable for the surfaces of Medical Devices.
Cover:
Observe the following washing conditions:
Wash in water, maximum temperature 90°C, reduced mechanical action, rinsing in decreasing
temperature, spin drying.
Bleaching possible, chlorination at 1000 ppm permitted.
Do not iron.
Do not dry clean or use solvent-based stain removers.
Tumble drying permitted, moderate temperatures
The MANUFACTURER will provide on request wiring diagrams, lists of components, descriptions, calibration instructions or any
other relevant information to SERVICING and MAINTENANCE STAFF in order to carry out permitted repairs in accordance with
the contract between the applicant and ASKLE, the manufacturer.
L

MAINTENANCE/SERVICING

Periodic servicing of AUTOMORPHO AXTAIR compressors is advised in order to maintain an ideal operating specification.
The periodic servicing interval recommended is indicated by the servicing light on the control panel coming on.
This servicing can only be carried out by authorised persons; contact your reseller.
- 10 -