Askle Sante Winncare Automorpho Plus Podręcznik użytkownika - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt medyczny Askle Sante Winncare Automorpho Plus. Askle Sante Winncare Automorpho Plus 20 stron.
Drukuj stronęUSE
C
ONTENT OF PACKAGING FOR MATTRESS TOPPER AND MATTRESS TYPE SUPPORTS
1 rolled support in a transport bag
1 dirty/clean label
1 identification label
1 integrated compressor in a rolled support
1 electrical power supply cable with 2 attachment systems to long sides of a
medical bed
1 user manual
O
PERATING PRINCIPLE
The dynamic mode enables alternation of pressure to avoid extended vascular
compression likely to result in tissue hypoxia.
The low pressure static mode enables the treatment of people requiring
immobilization (fractures, neurological injury, etc.), reduces secondary pain from a
local injury to a minimum, encourages patient rest, enables weaning before the
installation of a static support (...).
"
"
The
treatment
and transfer procedures.
The inflation pressure calculation is automatic and continuous according to a
'
patient
s morphology. No external intervention is needed.
The seated position function adjusts the pressure when the chest relief is over 30°.
The comfort setting adjusts the pressure irrespective of mode of operation and
position.
NOTES:
Contact the shop or service provider where the product was purchased for any
assistance with assembly, use or repair of the product.
I
NSTALLATION OF SUPPORTS
1.
Unroll the support.
2.
Position it on the bed base in accordance with the location of the
"
"
foot
symbols for the cover.
3.
Hang the compressor on the bed panel (foot side) using the hooks.
4.
Guide the power supply cable for the compressor along the bed to the closest
socket, attach it to long side of bed using 2 connectors on the cable and connect
the socket: All the LEDs come on for a few seconds and a BEEP is heard.
5.
If you have a rapid inflation kit, follow these steps, otherwise go to step 9.
6.
Open the CPR valve by positioning the index finger on OPEN,
Block the power supply pipe using the
WINNCARE FRANCE
(firm surface) mode facilitates handling during certain treatment
"
"
transport
stopper.
- 6 -
"
"
head
and
.