EGAmaster 63852 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Narzędzia EGAmaster 63852. EGAmaster 63852 14 stron. Torque multipliers

Once we have available all the required elements specified in section 1.2, we can start using the

torque multiplier:

1. Place the torque multiplier with the impact socket wrenches on the bolt or nut to be

tightened.

2. Adjust the output square of the reaction plate to the next available bolt or nut.

It must be ensured that the torque multiplier disposal is completely paralell to the surface it is

joined to. A bad disposal of the torque multiplier would act against the well functioning of the tool

and could cause damage in the torque multiplier.

3. Insert the corresponding torque wrench in the input square of the torque multiplier.

4. Tighten up with the torque wrench in a smooth and controllated way until the torque value is

reached.

Note:

In order to avoid any movement or mismatching while using the torque multiplier, please ensure

that the torque multiplier is correctly placed and well inserted in the impact socket wrenches.

It is very important to place the impact socket wrench of the supporting output square as fas as

possible form the main output square. So that, "D" distance must be the maximum available in the

working place (see picture below). That will help having bigger stability and safety.

4. INSTRUCTIONS