EGAmaster 67194 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wkrętak sieciowy EGAmaster 67194. EGAmaster 67194 19 stron.

Have your power tool serviced by a qualified repair person using only identical replacement parts.

This will ensure that the safety of the power tool is maintained.

Even when the power tool is used as prescribed it is not possible to eliminate all residual risk factors.

The following hazards may arise in connection with the power tool's construction and design:

- Damage to lungs if an effective dust mask is not worn.

- Damage to hearing if effective hearing protection is not worn.

- Damages to health resulting from vibration emission if the power tool is being used over longer

period of time or not adequately managed and properly maintained.

Hold power tool by insulated gripping surfaces, when performing an operation where the

fastener may contact hidden wiring or its own cord. Fasteners contacting a "live" wire may make

exposed metal parts of the power tool "live" and could give the operator an electric shock.

SAFETY ADVICE FOR RECHARGEABLE BATTERY AND CHARGER

Use only the battery provided with the tools or a replacement rechargeable battery from the

manufacturer and the provided charger. Only plug the battery charger in at 110-240V (50-60Hz) mains.

Protect battery and battery charger from humidity. Do not operate the battery charger outdoors. When

not in use and before cleaning and servicing, disconnect the battery charger from the power supply. Take

special care of the battery. Avoid dropping it onto any hard surface and do not subject it to pressure or

any other form of mechanical stress. Keep the battery away from extreme heat and cold. Do not open

or attempt to repair the battery or the battery charger. If any parts are defective, have them repaired by

a qualified technician or send them to our service department for repair. Only charge the battery at an

ambient (surrounding air) temperature between 10ºC and 40ºC. A charged battery can be used to power

the machine under ambient temperature conditions between 0ºC and 50ºC.When not in use, store the

battery in a dry place between 10ºC and 30ºC.

Important! Danger!

Never short-circuit the battery or expose it to moisture. Do not store it together with any metal parts

which could short-circuit the contacts. The battery could overheat, start burning or explode.

If any person comes into contact with acid or similar internal fluids or substances contained

in the battery, wash off these substances immediately with plenty of water. If these substances

make contact with the eyes, rinse with plenty of water and visit a doctor immediately.

Do not place the rechargeable battery into fire or water. It can explode. The Rechargeable Battery

should not be discarded to domestic refuse, regardless of whether used or unused. You should return

it to a local battery collection point in accordance with Battery Regulations or return them to us suitably

marked "Used Battery".

SPECIAL SAFETY WARNINGS FOR SCREWDRIVER

6) SERVICE