Bluerock Tools 808 series Instrukcja serwisowa - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Narzędzia Bluerock Tools 808 series. Bluerock Tools 808 series 10 stron. Wire strippers

Drukuj stronę
19. Set the 2 sets of springs and spring caps in place over the set screws as shown with a
small spring inside each large spring.
20. Screw 2 T-handle blots into the flat brackets as shown until the small springs below the
roller are depressed. Tighten each bolt an additional quarter inch to set default spring
tension.