Bluerock Tools CG-211Y Podręcznik operacyjny - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik operacyjny dla System spawania Bluerock Tools CG-211Y. Bluerock Tools CG-211Y 16 stron. Pipe torch/burner machine

Drukuj stronę

C G - 2 1 1 Y

T O R C H

Ø Tighten the valve assembly side onto the top of the flat steel bar left of the main chain tightener

wing nut (see figure above). Ensure it is secured tightly.

Ø Install the large wheels if you are going to be cutting smaller pipe (see figure below).

Note: You do not want the middle of the machine to high center on smaller pipe, hence

the need for the large wheels.

TRANSPORTING THE MACHINE

Ø When transporting the machine, always carry under the machine wheels.

Ø Ensure the torch tip is in a raised position so it will not get damaged when lifting up the machine

or putting down the machine on pipe.

Ø If transporting inside a vehicle, it is recommended to transport it on its side so as to avoid the

item falling over. It is also recommended to protect the wheels from damage by placing on non-

abrasive surface.

Ø DO NOT carry the machine by the hoses.

B U R N E R

M A C H I N E