d&b audiotechnik 24S-D Podręcznik - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik dla Głośniki d&b audiotechnik 24S-D. d&b audiotechnik 24S-D 14 stron. Xs series

Cover plate and rubber grommet

Step 1

Step 2

Installing the fixed cable connection

Step 3

Fixed cable connection

The 24S and 24S-D loudspeakers are each supplied with a cover

plate [1] and a rubber grommet feed through [2]. For indoor

operation, these items can be used to hide the connector panel, if

required. For unprotected outdoor operation, the connector panel

must be covered, i.e. both items must be used to achieve an IP

degree of protection of IP34.

To install the fixed cable connection, proceed as follows:

Tools required: Philips screw driver (#PH2).

1. Remove the knockout opening in the cover plate [1] and

attach the rubber grommet [2] correspondingly.

2. Insert the connection cable through the rubber grommet.

3. Undo the four screws of the connector panel.

4. Connect the cable wires to the screw terminal.

Þ Observe the correct polarity!

5. Push the cover plate towards the connector panel until it fits

into place.

6. Finally fix the cover plate together with the connector panel

using all screws.

Step 4/5

Step 6

d&b 24S/24S-D Manual 1.1 en